Manual Hand Bilge Pump – No Power, 2724 L/hr, 3m Suction, Boat & RV

Problems This Pump Solves

• No Power Available: Works entirely by hand — no 12V, no 24V, no shore power needed. Perfect for emergencies, remote anchorages, or power failures.
• Electric Pump Won't Fit: Compact body (15.5cm wide) fits narrow bilge compartments and tight spaces where electric pumps physically cannot be installed.
• Slow Drainage in Emergencies: 2724 L/hr (45 L/min) flow rate clears bilge water fast — critical when every minute counts during flooding or heavy rain ingress.
• Pump Slips During Use: Reinforced stable base prevents the pump from moving or sliding during operation. Ribbed non-slip handle grip ensures firm control even with wet hands.

Key Features

• No Power Required: 100% manual operation — no electrical connection, no battery, no wiring. Always ready, even when your boat's electrical system fails.
• High Flow Rate – 2724 L/hr: Delivers up to 2724 liters per hour (45 L/min) of drainage capacity — serious bilge-clearing performance from a hand-operated pump.
• 3m Suction Depth / 4m Discharge Height: Self-priming suction up to 3 meters (10ft). Discharge head up to 4 meters (13ft). Handles deep bilge sumps and elevated discharge routing.
• Fits Narrow Bilge Compartments: Compact 15.5cm wide body fits where electric pumps can't — narrow bilge channels, tight engine room spaces, and confined hull sections.
• Stainless Steel Handle – Corrosion Resistant: Premium stainless steel pump arm resists rust and corrosion in saltwater marine environments. Built for long service life.
• Ribbed Non-Slip Grip: Textured rubber grip on the handle provides secure, comfortable pumping even with wet or gloved hands.
• Reinforced Stable Base: Wide, reinforced ABS base prevents the pump from shifting or tipping during vigorous pumping. Mounting holes for permanent installation.
• ABS Engineering Plastic Body: Lightweight, impact-resistant ABS construction. Corrosion-proof, saltwater safe, and durable in marine environments.

Ideal Use Cases

• 🚤 Boat & Yacht Bilge Drainage: Primary or backup bilge pump for sailboats, motorboats, and yachts — works when electric systems fail
• ⛵ Emergency Flooding Response: Fast manual drainage during heavy rain ingress, hull leaks, or flooding events
• 🚐 RV & Campervan Water Tanks: Manual transfer or drain of freshwater tanks without needing a pump power source
• 🏕️ Off-Grid & Remote Use: Ideal where no power is available — camping, remote anchorages, tidal zones
• 💧 General Water Transfer: Pond draining, barrel emptying, tank-to-tank transfer, flood cleanup

Installation Notes

Mount the pump base at the lowest accessible point of the bilge using the integrated mounting holes and appropriate fasteners. Connect a hose to the 2.5cm outlet port and route to your overboard discharge point. To operate, grip the stainless steel handle and pump with a steady up-down motion. No priming required. For permanent installation, secure the base firmly to prevent movement during pumping.

• Product Name: Manual Hand Bilge Pump
• Material: ABS Engineering Plastic + Stainless Steel Handle
• Flow Rate: 2724 L/hr (45 L/min)
• Max Suction Depth: 3m (10ft)
• Max Discharge Height: 4m (13ft)
• Handle Length: 24.5cm
• Body Width: 15.5cm
• Outlet Diameter: 2.5cm
• Power Required: None (manual operation)
• Handle Grip: Ribbed non-slip rubber
• Base: Reinforced stable ABS with mounting holes
• Country of Origin: China