Automatic Boat Bilge Pump - 750 / 1100 / 2000 GPH Options
Shipping to United Arab Emirates Β· USD
Shipping options and final rates are shown at checkout.
See shipping information30-Day Return Policy
You have 30 days after receiving your item to request a return. Return shipping costs are the customerβs responsibility unless the item is damaged, defective, or incorrect.
Choose the outlet, voltage and pump size for your bilge
An automatic bilge-pump selection with a white housing and removable slotted strainer. The 750 and 1100 GPH photographs show blue-base configurations; the 2000 GPH photograph shows a black-base configuration with separate straight and angled outlet fittings. Compare the selected version with your current pump and hose arrangement.
Specifications and options
| 750 GPH selections | 12V DC / 24V DC; photographed outlet reference 19 mm |
|---|---|
| 1100 GPH selections | 12V DC / 24V DC; photographed outlet reference 29 mm |
| 2000 GPH selection | 12V DC; separate straight and angled 29 mm fitting references pictured |
| Strainer access | Removable slotted base shown in the original photographs |
| Automatic control | Built-in automatic-control configuration; confirm the supplied wiring instructions |
Compare the original outlet photographs
750 GPH housing drawing
Photographed 1100 GPH 12V label
| Voltage on the photographed label | 12V |
|---|---|
| Current on the photographed label | 3.8 A |
| Fuse annotation on the photographed label | 6.0 A |
These are label references for the photographed 1100 GPH 12V unit. Do not transfer them to another voltage or flow selection. Use the wiring and circuit-protection instructions for the actual supplied pump.
Plan the installation
Conceptual bilge drainage layout
Bilge water β Pump strainer β Discharge hose β Suitable discharge outlet
Planning diagram only. Confirm mounting position, hose routing, control arrangement and protection against backflow for the actual vessel and supplied pump.
- Match the selected voltage, pump nameplate and actual control arrangement before choosing wiring or circuit protection.
- Allow space for the complete pump, hose bend and removal of the strainer for inspection. Check the actual mounting pattern.
- Match the hose to the supplied outlet, support the hose and choose the discharge arrangement according to the vessel installation requirements.
- Use the supplied pump instructions for wiring and commissioning. Verify drainage, switching and joints after installation, then inspect the strainer and hose regularly.
Contact ROQIFY for the current variant nameplate, wiring instructions and installation drawing before selecting a replacement.