Skip to content
Free Shipping on Selected RV & Marine Accessories — Availability Shown at Checkout
Shipping options shown at checkout
Original orange submersible drainage pump photograph showing two housing sizes, upper discharge outlets and black intake bases.
Original orange pump photographed beside water with a handling rope. Model-specific electrical and operating limits require the supplied instructions.
Original Model 1501 dimension photograph: 270 mm height, 165 mm body width, 32 mm upper outlet and separate 25 mm adapter reference.
Original Model 1301 dimension photograph: 250 mm height, 135 mm body width and 25 mm upper outlet reference. Check the supplied voltage label.
Original Model 1301 alternate dimension photograph: 250 mm height, 135 mm body width and 25 mm outlet reference. Photograph alone does not establish 24V electrical ratings.
Original orange submersible drainage pump photograph showing two housing sizes, upper discharge outlets and black intake bases.
Original orange pump photographed beside water with a handling rope. Model-specific electrical and operating limits require the supplied instructions.
Original Model 1501 dimension photograph: 270 mm height, 165 mm body width, 32 mm upper outlet and separate 25 mm adapter reference.
Original Model 1301 dimension photograph: 250 mm height, 135 mm body width and 25 mm upper outlet reference. Check the supplied voltage label.
Original Model 1301 alternate dimension photograph: 250 mm height, 135 mm body width and 25 mm outlet reference. Photograph alone does not establish 24V electrical ratings.

DC Submersible Drainage Pump - Model 1301 / 1501 Options

$55.90 - $59.90
$55.90
$55.90 - $59.90
$55.90
Availability:
100 in stock, ready to be shipped
Availability:
100 in stock, ready to be shipped
Availability:
100 in stock, ready to be shipped

Shipping to United Arab Emirates · USD

Shipping options and final rates are shown at checkout.

See shipping information

30-Day Return Policy

You have 30 days after receiving your item to request a return. Return shipping costs are the customer’s responsibility unless the item is damaged, defective, or incorrect.

Compare the pump body, outlet and selected voltage

An orange submersible drainage-pump selection with an upper discharge outlet, carry-handle opening, attached power lead and black intake base. The 1301 and 1501 photographs show different housing sizes and outlet arrangements. Match the selected model, voltage and connection before installation.

Specifications and options

Model 1301 selections 12V DC / 24V DC
Model 1301 size references 250 mm height × 135 mm width; 25 mm outlet annotation
Model 1501 selection 24V DC
Model 1501 size references 270 mm height × 165 mm width; 32 mm upper outlet annotation
Model 1501 adapter photograph Separate black adapter shown with 25 mm annotation; confirm the supplied adapter and thread
Handling and intake Carry-handle opening and black lower intake base visible in original photographs

Original Model 1301 size reference

Original orange Model 1301 pump dimension photograph showing 25 cm height, 13.5 cm width and 25 mm upper outlet reference.
Model 1301 housing reference. Check the selected voltage on the supplied unit; the housing image does not establish electrical ratings.

Original Model 1501 size reference

Original orange Model 1501 pump dimension photograph showing 27 cm height, 16.5 cm width, 32 mm upper outlet and a separate 25 mm adapter reference.
Model 1501 housing and adapter references. Confirm actual hose fit, adapter thread and current supplied parts.

Original water-discharge demonstration

Original demonstration photograph of an orange pump discharging water near a body of water. No fixed vessel installation or hose route is shown.
Water-discharge demonstration. This photograph does not specify permitted immersion depth, duty cycle or installation position.

Installation planning

  1. Confirm the exact model and DC voltage on the delivered nameplate and obtain the matching wiring instructions.
  2. Match the hose and adapter to the actual discharge connection. Check the required lift, hose length and tested flow before selecting the pump.
  3. Allow clearance around the intake and secure the pump using the approved arrangement. Do not place handling loads on the power lead.
  4. Use the supplied instructions for liquid compatibility, immersion, duty and electrical protection. The original label warns against operating the pump empty.
  5. Check drainage and connections during commissioning and inspect the intake for debris.

Ask ROQIFY for the current model nameplate, flow/head curve and installation instructions.

Product details

Compare the pump body, outlet and selected voltage

The listed selections are 12V Model 1301, 24V Model 1301 and 24V Model 1501. Original dimension photographs show 250 mm height and 135 mm body width for 1301, and 270 mm height and 165 mm body width for 1501. Confirm the actual supplied nameplate and operating instructions.

Specifications & installation

Specifications and installation

Model 1301 selections: 12V DC / 24V DC; Model 1301 size references: 250 mm height × 135 mm width; 25 mm outlet annotation; Model 1501 selection: 24V DC; Model 1501 size references: 270 mm height × 165 mm width; 32 mm upper outlet annotation; Model 1501 adapter photograph: Separate black adapter shown with 25 mm annotation; confirm the supplied adapter and thread; Handling and intake: Carry-handle opening and black lower intake base visible in original photographs

See the product description for the dimension reference, application image and fit checks.

Shipping Information

Availability and rates shown at checkout.

Here to Help

Get in touch with us Monday–Friday

RV & Marine Parts

Parts for maintenance, replacement and upgrades.

AFTER-SALES SUPPORT

Professional service you can rely on