Zu Inhalt springen
Jetzt kostenloser Versand für alle Bestellungen über 150 $! Details anzeigen.
Jetzt versandkostenfrei ab einem Bestellwert von 150 $!

Manual Hand Bilge Pump – No Power, 2724 L/hr, 3m Suction, Boat & RV

Ursprünglicher Preis $45.90 - Ursprünglicher Preis $45.90
Ursprünglicher Preis
From $45.90
$45.90 - $45.90
Aktueller Preis $45.90
Verfügbarkeit:
100 auf Lager, bereit zum Versand

Kostenlose Rücksendungen für alle qualifizierten Bestellungen

Sie haben 30 Tage Zeit, eine Rücksendung anzufordern. Alle reduzierten Artikel sind vom Umtausch ausgeschlossen.

Bilge water rising with no power source nearby, no room for a bulky electric pump, and a narrow bilge compartment where nothing else fits — this manual hand bilge pump solves all three instantly. No battery, no wiring, no motor to burn out. Just pump the stainless steel handle and drain up to 2724 liters per hour from any bilge, tank, or flooded space. With a 3m (10ft) suction depth, 4m (13ft) discharge height, compact ABS body that fits tight spaces, and a non-slip ribbed grip that won't slip in wet hands, this is the pump every boat, RV, and emergency kit needs as a reliable backup — or primary — bilge solution.

Versandinformationen

Problems This Pump Solves

  • No Power Available: Works entirely by hand — no 12V, no 24V, no shore power needed. Perfect for emergencies, remote anchorages, or power failures.
  • Electric Pump Won't Fit: Compact body (15.5cm wide) fits narrow bilge compartments and tight spaces where electric pumps physically cannot be installed.
  • Slow Drainage in Emergencies: 2724 L/hr (45 L/min) flow rate clears bilge water fast — critical when every minute counts during flooding or heavy rain ingress.
  • Pump Slips During Use: Reinforced stable base prevents the pump from moving or sliding during operation. Ribbed non-slip handle grip ensures firm control even with wet hands.

Key Features

  • No Power Required: 100% manual operation — no electrical connection, no battery, no wiring. Always ready, even when your boat's electrical system fails.
  • High Flow Rate – 2724 L/hr: Delivers up to 2724 liters per hour (45 L/min) of drainage capacity — serious bilge-clearing performance from a hand-operated pump.
  • 3m Suction Depth / 4m Discharge Height: Self-priming suction up to 3 meters (10ft). Discharge head up to 4 meters (13ft). Handles deep bilge sumps and elevated discharge routing.
  • Fits Narrow Bilge Compartments: Compact 15.5cm wide body fits where electric pumps can't — narrow bilge channels, tight engine room spaces, and confined hull sections.
  • Stainless Steel Handle – Corrosion Resistant: Premium stainless steel pump arm resists rust and corrosion in saltwater marine environments. Built for long service life.
  • Ribbed Non-Slip Grip: Textured rubber grip on the handle provides secure, comfortable pumping even with wet or gloved hands.
  • Reinforced Stable Base: Wide, reinforced ABS base prevents the pump from shifting or tipping during vigorous pumping. Mounting holes for permanent installation.
  • ABS Engineering Plastic Body: Lightweight, impact-resistant ABS construction. Corrosion-proof, saltwater safe, and durable in marine environments.

Ideal Use Cases

  • 🚤 Boat & Yacht Bilge Drainage: Primary or backup bilge pump for sailboats, motorboats, and yachts — works when electric systems fail
  • Emergency Flooding Response: Fast manual drainage during heavy rain ingress, hull leaks, or flooding events
  • 🚐 RV & Campervan Water Tanks: Manual transfer or drain of freshwater tanks without needing a pump power source
  • 🏕️ Off-Grid & Remote Use: Ideal where no power is available — camping, remote anchorages, tidal zones
  • 💧 General Water Transfer: Pond draining, barrel emptying, tank-to-tank transfer, flood cleanup

Installation Notes

Mount the pump base at the lowest accessible point of the bilge using the integrated mounting holes and appropriate fasteners. Connect a hose to the 2.5cm outlet port and route to your overboard discharge point. To operate, grip the stainless steel handle and pump with a steady up-down motion. No priming required. For permanent installation, secure the base firmly to prevent movement during pumping.

Rückgabe & Garantie
  • Product Name: Manual Hand Bilge Pump
  • Material: ABS Engineering Plastic + Stainless Steel Handle
  • Flow Rate: 2724 L/hr (45 L/min)
  • Max Suction Depth: 3m (10ft)
  • Max Discharge Height: 4m (13ft)
  • Handle Length: 24.5cm
  • Body Width: 15.5cm
  • Outlet Diameter: 2.5cm
  • Power Required: None (manual operation)
  • Handle Grip: Ribbed non-slip rubber
  • Base: Reinforced stable ABS with mounting holes
  • Country of Origin: China

Why Choose ROQIFY

Backed by over 10 years of manufacturing and export experience, ROQIFY is committed to providing reliable RV and marine solutions trusted by customers worldwide
10+ Years Industry Experience
Exported to 100+ Countries Worldwide
Reliable Quality Control & Testing
Competitive Factory Direct Pricing
Professional OEM & ODM Support
Fast Response & Customer Service
Trusted by RV & Marine Customers Globally
ROQIFY®
Powered by Jiangsu Yumu Electromechanical Co., Ltd.
Reliable Solutions for RV & Marine Living.

Kostenloser Versand

Wenn Sie 50 $ oder mehr ausgeben

Wir sind für Sie da

Kontaktieren Sie uns 7 Tage die Woche

Abholung im Laden

Holen Sie Ihre Bestellung selbst ab, kostenlos

Einfacher Austausch

Rückgabe oder Umtausch innerhalb von 60 Tagen